Stud Finder Wall Scanner, Meterk 2 in 1 Stud Sensor Wall Detector & Laser Distan

Description

Stud Finder Wall Scanner, Meterk 2 in 1 Stud Sensor Wall Detector & Laser Distance Measure, Wall Detector Edge Center Finding with LCD Display for Wood AC Wire Metal Studs Detection
📍【High-Precision Detector】 Quickly locate the stud wood metal AC wire. Wood measurement has two modes to detect depth to the greatest extent: precise mode 20 mm, depth mode 38 mm; metal measurement mode, which can measure non-magnetic metals (non-ferrous copper) 80 mm and magnetic metal (ferrous metals )100mm; copper wires（≥mm2 ) 40mm
📍【2 in 1 Stud Finder Laser Distance 】 The new measuring device can not only measure metals (steel rods, copper pipes) and cables, wood, etc. hidden under walls, ceilings, floors and gypsum boards, but also measure laser ranging, area. Whether you are a professional, homeowner or DIY enthusiast, you can find great use in this stud scanner.
📍【Multi-Function Distance Meter】 This instrument uses laser precision technology as a distance meter, with an accuracy of ±5MM and a measurement distance of up to 40m; it can be freely switched between M / In / Ft; multiple measurement functions Range, distance, length, continuous measurement, Pythagorean method, and 30 sets of data storage functions.
📍【Energy Saving and Calibration Function】 The device has an automatic shutdown function. If there is no function within 20 seconds, it will automatically shut down. In addition, the device is powered by a lithium battery. We provide a USB charging cable that can be used multiple times; calibrating before use can provide you with maximum reliability and accuracy.
📍 【Mute Setting and LCD Backlight】 Large backlit screen can provide better visibility in dark areas. Using the mute function, you can turn the signal tone on or off as needed. Suitable for libraries, classrooms and other quiet places.
Product Description
Take it home and start your project!
The Meterk bolt finder has a 2-in-1 function and can not only measure metals (steel rods, copper pipes) and cables hidden under walls, ceilings, floors and plasterboard, wood, etc., but also laser distance measurement and area. Whether you are a professional, a homeowner, or a DIY enthusiast, this product can bring you great help.
Whether you are installing a television, hanging a picture, renovating part of a house, or wanting to know the other side as a professional builder. The Meterk Stud Finder is one of the tools you will need in the end. The Meterk Locator can mean the difference between a successful DIY home project and a bad project.
Locator has a large LCD display, ergonomic design, and multiple sensor technologies that can accurately identify metal and wooden pens. With this device you can immediately find a suitable position on the wall without having to punch additional holes.
In addition, the Meterk bolt finder has several functions: wood measuring function, metal measuring function, alternating current function, automatic switch-off function and muting.
This multi-function scanner stud finder uses electronic signals to quickly locate the edges and centers of AC power lines behind metal, studs, beams, pipes, walls, floors and ceilings. The cost of a pen finder wall scanner is almost always less than the cost of repairing damage caused by not positioning it before hanging it.
Our brand always pays attention to the customer experience and offers after-sales service. At the same time we uploaded the manual to the list. If necessary, you can download the manual to view it
Wood measurement (foreign bodies)
Maximum detection depth: precision mode: 20 mm, depth mode: 38 mm. Press and hold the button in the center to switch to precision and deep scan mode.
The foreign body detection mode detects objects in plasterboard walls, plywood, solid wood and coated wooden walls.
Metal measurement
Press the button in the center to turn on the detection function, and press the button on the right to enter the detection metal interface.
Place the instrument on the surface of the detector and move the instrument left or right in the same direction. As the instrument gradually detects the metal object, the metal symbol * will appear on the screen and gradually increase in size as the instrument approaches the metal object. At the same time the loudspeaker reports "metal". When the instrument is closest to the metal, a central symbol appears on the display.
Power cord measurement
Press the center button to turn on the detection function, then press the right button to access the metal detection interface.
Place the instrument on the surface of the detector and move the instrument left and right in the same direction. As the instrument gradually detects the power cord, the symbol * for the power cord will appear on the screen and gradually increase as the instrument approaches the power cord.
Range finder specifications
Measure distance with laser
Test range: 0.05-40 M
Test accuracy: ± 5 MM
Laser power: <1 MW
Laser wavelength: 620-670 NM
Automatic shutdown: 20 s
Data storage: 30 groups
Double Pythagorean measurement
Technical Parameters
Maximum depth of detection
Ferrous metals: 100 mm / non-ferrous metals (copper): 80 mm / copper wires (≥ mm2): 40 mm / foreign bodies (wooden lath): 20 mm / 38 mm
Operating humidity range
At metal mode: 0-85% RH / foreign bodies: 0-60% RH
Measurement accuracy
± 5mm
Unit
m / in / ft
Measuring range (no reflector)
0.05-40m
Measure time
0.3-4 seconds
Laser type
620 ~ 670nm, <1mw
Automatic shut down laser
20 seconds
Save the data
30 records
Automatic switch-off time
Approx. 5 minutes
The screen
1.8 inch color screen
Battery type and service life
Built-in 400 mAH lithium battery
Individual measurement
Approx. 5000 times
Product size
135 * 60 * 25mm
Operating temperature range
0 C ° ～ 40 C °