John Deere compact tractor bolt on grab tow handle 1025r 2025r 2038r 3033r hooks

Description

Custom Tractor Accessories
JU FabWorks
Made in the
U.S.A.
Visit us at www.jufabworks.com
for additional accessories and Payment options!
John Deere Compact Tractor Bolt on Grab/Tow Handles
Specifically Designed for Your Tractor Bucket!
​​​​​​​
There's no Doubt, Your Tractor is an Expensive Investment, use it to its fullest potential! These Grab/Tow handles are extremely heavy duty and and are perfect for attaching tow straps, rope, ratchet straps and chains. The options are endless!
Bracket is designed for a perfect fit on top of your John Deere tractor Bucket. Constructed of a 1/4" steel plate foundation and leading edge construction that aligns perfectly to the contour of the bucket.
Whats Included:  Sold Individually (The more you purchase the more you save)
1 Tow/Grab Handle. Made of 1/4" steel plate foundation. 5/8" Diameter Tow Grab handle. Working Capacity of 5000lbs each
Full Industrial E-Coating and Powdercoated John Deere Green.
All Welded Construction
All hardware Included (1/2" Grade 8 Bolts, Lock Nuts, Washers)
Instructions for Mounting
These plates are specifically designed for John Deere sub compact and compact tractor buckets and will fit all size buckets including:
Please measure your Tractors bucket. These will work on John Deere 49" Bucket but will overhang the rear portion of the bucket approximately 1/2". All other buckets listed below is for an exact fit.
49" Bucket  FYI ( Will fit but will overhang on rear of bucket approximately 1/2")
53" Materials Bucket
57" Materials Bucket
57" Heavy Duty Bucket
61" Materials Bucket.
61" Heavy Duty Bucket
72" Materials Bucket
72" Heavy Duty Bucket
4100 4010 4110 4115 2320, 2520, 2720 2025r 2032r 2038r
4200 4300 4400 4500 4600 4700 4210 4310 4410 4610 4710 4120 4320 4520 4720 4052R 4066R
3120 3320 3520 3720
2210 2305 1026r 1023e 1025r
3025e 3032e 3038e
3033r 3039r 3046r
4044M 4049M 4052M 4066M
Attention:
When ordering there are 6 Variations, Please make sure to choose the correct one for correct
Quantity
and bolt length.
(Standard Duty Bucket) Fits 49",53",57", 57"HD,61" and 72" buckets. These buckets have a single walled top construction and will use the shorter 1.25" bolts (Included)
(Heavy Duty Bucket)  Fits 61"HD and 72"HD buckets only. These buckets come with a double walled construction and will need the longer 2.5" bolts. (Included)
NOTE: The heavy duty buckets  are only availble from John Deere in 61" and 72" and are most commonly found on the 3000 and 4000 series John Deere tractors. Almost all 1000 series and 2000 series tractors come standard with the standard duty bucket. The 1025r in the pictures has the standard duty bucket.
All JUFabWorks Products carry a 1 Year Manufacturing Structural Warranty
Before you leave make sure to check out our other items for your John Deere Tractor!  Just click on "See Other Items" under Seller Info.  Thank You!
Field Tested, Landscaper Approved!
​​​​​​​John Deere Compact Tractor Grab Hooks, D rings, Receiver Hitch ALL IN ONE Bracket! Perfect for lifting heavy or awkward objects and equipment, materials, pulling shrubs out, moving trailers around, the options are endless! Your tractor is an expensive investment, use it to its fullest potential! Bracket greatly increases the strength of the center portion of the bucket due to the 1/4" steel plate foundation and leading edge construction that aligns perfectly to the contour of the John Deere tractor buckets Whats Included: ---22" L x 6" W x 1/4" thick Steel plate with 70 Degree bend on the front leading edge for increased strength ---2 5/16" forged Grab Hooks (G70) rated at 4700lbs WLL. (Will except 3/8" chain and under) ---2 1/2" forged D rings (rated at 12,000 lb break strength) ---1 2" receiver with 5/8" center hole ---All Welded Construction ---All hardware Included (7/16" Grade 8 Bolts, Lock Nuts, Washers) ---Instructions for Mounting Note: All Bolt on brackets come Fully Painted John Deere Green and include all attaching hardware. All Weld on brackets will come UN Painted. This bracket is specifically designed for John Deere sub compact and compact tractor buckets and will fit all size buckets including: 49" Materials Bucket 53" Materials Bucket 57" Materials Bucket 57" Heavy Duty Bucket 61" Materials Bucket. 61" Heavy Duty Bucket 72" Materials Bucket 72" Heavy Duty Bucket 4100 4010 4110 4115 2320, 2520, 2720 2025r 2032r 2038r 4200 4300 4400 4500 4600 4700 4210 4310 4410 4610 4710 4120 4320 4520 4720 3120 3320 3520 3720 2210 2305 1026r 1023e 1025r 3025e 3032e 3038e 3033r 3039r 3046r Attention: When ordering bracket there are 3 Variations, Please make sure to choose the correct one for correct bolt length. BOLT ON, (Standard Duty Bucket) Fits 49",53",57", 57"HD,61" and 72" buckets. Comes with 1.5" BOLTS BOLT ON, (Heavy Duty Bucket) Fits 61"HD and 72"HD buckets only. Comes with 2.5" BOLTS due to the boxed construction of top of the bucket. Please refer to the Picture of the Heavy Duty Bucket above to verify correct ordering. WELD ON (Fits all Buckets) NOTE: The heavy duty buckets are only availble from John Deere in 61" and 72" and are most commonly found on the 3000 and 4000 series John Deere tractors. Almost all 1000 series and 2000 series tractors come standard with the standard duty bucket. The 1025r in the pictures has the standard duty bucket. Field Tested, Landscaper Approved!
JU FabWorks
Custom Tractor Accessories
Made in the
U.S.A.
John Deere Compact tractor bolt on grab hooks, D rings, 2" Receiver ALL-IN-ONE!
​​​​​​​
John Deere Compact Tractor Grab Hooks, D rings, Receiver Hitch ALL IN ONE Bracket!
Perfect for lifting heavy or awkward objects and equipment, materials, pulling shrubs out, moving trailers around, the options are endless!  Your tractor is an expensive investment, use it to its fullest potential!
Bracket greatly increases the strength of the center portion of the bucket due to the 1/4" steel  plate foundation and leading edge construction that aligns perfectly to the contour of the John Deere tractor buckets
Whats Included:
22" L x 6" W x 1/4" thick Steel plate with 70 Degree bend on the front leading edge for increased strength
2   5/16" forged Grab Hooks (G70) rated at 4700lbs WLL. (Will except 3/8" chain and under)
2   1/2"  forged D rings (rated at 12,000 lb break strength)
1   2" receiver with 5/8" center hole
All Welded Construction
All hardware Included (7/16" Grade 8 Bolts, Lock Nuts, Washers)
Instructions for Mounting
Note: All Bolt on brackets come Fully Painted John Deere Green and include all attaching hardware.
All Weld on brackets will come UN Painted.
This bracket is specifically designed for John Deere sub compact and compact tractor buckets and will fit all size buckets including:
49" Materials Bucket
53" Materials Bucket
57" Materials Bucket
57" Heavy Duty Bucket
61" Materials Bucket.
61" Heavy Duty Bucket
72" Materials Bucket
72" Heavy Duty Bucket
4100 4010 4110 4115 2320, 2520, 2720 2025r 2032r 2038r
4200 4300 4400 4500 4600 4700 4210 4310 4410 4610 4710 4120 4320 4520 4720
3120 3320 3520 3720
2210 2305 1026r 1023e 1025r
3025e 3032e 3038e
3033r 3039r 3046r
Attention:
When ordering bracket there are 3 Variations, Please make sure to choose the correct one for correct bolt length.
BOLT ON, (Standard Duty Bucket) Fits 49",53",57", 57"HD,61" and 72" buckets. Comes with 1.5" BOLTS
BOLT ON, (Heavy Duty Bucket)  Fits 61"HD and 72"HD buckets only. Comes with 2.5" BOLTS due to the boxed
construction of top of the bucket.
Please refer to the Picture of the Heavy Duty Bucket above to verify correct ordering.
WELD ON (Fits all Buckets)
NOTE: The heavy duty buckets  are only availble from John Deere in 61" and 72" and are most commonly found on the 3000 and 4000 series John Deere tractors. Almost all 1000 series and 2000 series tractors come standard with the standard duty bucket. The 1025r in the pictures has the standard duty bucket.
Field Tested, Landscaper Approved!
​​​​​​​
John Deere Compact Tractor Grab Hooks, D rings, Receiver Hitch ALL IN ONE Bracket!
Perfect for lifting heavy or awkward objects and equipment, materials, pulling shrubs out, moving trailers around, the options are endless!  Your tractor is an expensive investment, use it to its fullest potential!
Bracket greatly increases the strength of the center portion of the bucket due to the 1/4" steel  plate foundation and leading edge construction that aligns perfectly to the contour of the John Deere tractor buckets
Whats Included:
22" L x 6" W x 1/4" thick Steel plate with 70 Degree bend on the front leading edge for increased strength
2   5/16" forged Grab Hooks (G70) rated at 4700lbs WLL. (Will except 3/8" chain and under)
2   1/2"  forged D rings (rated at 12,000 lb break strength)
1   2" receiver with 5/8" center hole
All Welded Construction
All hardware Included (7/16" Grade 8 Bolts, Lock Nuts, Washers)
Instructions for Mounting
Note: All Bolt on brackets come Fully Painted John Deere Green and include all attaching hardware.
All Weld on brackets will come UN Painted.
This bracket is specifically designed for John Deere sub compact and compact tractor buckets and will fit all size buckets including:
49" Materials Bucket
53" Materials Bucket
57" Materials Bucket
57" Heavy Duty Bucket
61" Materials Bucket.
61" Heavy Duty Bucket
72" Materials Bucket
72" Heavy Duty Bucket
4100 4010 4110 4115 2320, 2520, 2720 2025r 2032r 2038r
4200 4300 4400 4500 4600 4700 4210 4310 4410 4610 4710 4120 4320 4520 4720
3120 3320 3520 3720
2210 2305 1026r 1023e 1025r
3025e 3032e 3038e
3033r 3039r 3046r
Attention:
When ordering bracket there are 3 Variations, Please make sure to choose the correct one for correct bolt length.
BOLT ON, (Standard Duty Bucket) Fits 49",53",57", 57"HD,61" and 72" buckets. Comes with 1.5" BOLTS
BOLT ON, (Heavy Duty Bucket)  Fits 61"HD and 72"HD buckets only. Comes with 2.5" BOLTS due to the boxed
construction of top of the bucket.
Please refer to the Picture of the Heavy Duty Bucket above to verify correct ordering.
WELD ON (Fits all Buckets)
NOTE: The heavy duty buckets  are only availble from John Deere in 61" and 72" and are most commonly found on the 3000 and 4000 series John Deere tractors. Almost all 1000 series and 2000 series tractors come standard with the standard duty bucket. The 1025r in the pictures has the standard duty bucket.
Field Tested, Landscaper Approved!
John Deere 1025r 2025r 3033r Custom grab hooks and products manufactured in USA by Jufabworks!
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]