FMUX04E-AD 4 T1/E1 to fiber multiplexer with Ethernet dual SFP AC& DC48V power

Description

Product description
The FMUX04E-AD fiber multiplexer is a small but powerful unit. It bundles together up to 4 E1 or T1 interfaces and a full 100Mbps channel of Ethernet data. It also offers a built-in order wire port for E&M voice connections (for service or troubleshooting between two units connected over the fiber). The FMUX04E-AD offers redundancy on power source input, supporting AC 90~240V and DC -18~-72V and on fiber connection by having two redundant SFP ports for 155Mbps optical modules. The SFP ports bring a great level of flexibility by allowing user to choose the appropriate SFP transceiver for his needs. The Ethernet is available on three 10/100Mbps ports that can support separate port based VLANs for physical separation of three Ethernet networks.
FMUX04E-AD is a perfect choice for a variety of applications like wireless back-haul for remote areas, E1/T1 and Ethernet  transport over same fiber, inter building voice and data network connections and so on .
FMUX04E-AD has built in E1 and T1 interfaces. The console CLI or the LCD panel allow full management of local and remotely connected unit. The FMUX04E-AD equipment can be used either under European E1 or US T1 standards.
The FMUX04E-AD unit can be managed through serial console and local LCD key panel, as well as SNMP.
The FMUX04E-AD fiber multiplexer works with OC3/STM1/155Mbps optical SFP transceivers. To check the full range of available transceivers, including single strand BiDirectional models and long haul optics please visit our SFP transceivers.
Features
Standalone unit (1U, 1.75"). An optional mounting kit
is available for single or side-by-side mounting in a 19" rack
Channel service setting and remote loop-back setting via front
panel LCD keys
Far End Fault (FEF) on fiber link, selectable
On-line Bit Error Rate monitor feature with four error-rate classes
Provides three dedicated GFast Ethernet 10/100Base-Tx ports with VLAN settings
Provides one supervisory port (DB9 connector) for ASCII terminal
and one alarm relay contact
SNMP management, local RS-232 console management
two redundant SFP slots for fiber connectivity accepting 155M rated SFP transceivers
two redundant power supplies: one AC 90-240V and the other DC36-72V suitable for both commercial and telecom environment
System BER <= 10-11
Product Specifications
Console interface
RS-232D (RJ-45) Asynchronous
Bit rate 19200,8N1
System performance
BER<=10^-11
Alarm
Single relay contact
LEDs
Power, Optical, Minor & Major Alarm, Far End and Near End Error, System Failure E1&T1 signal status
Power
AC
Internal PSU,
AC input: 100 — 240 VAC±10%; Frequency: 50 — 60Hz
DC
Internal PSU DC input: 36 — 72 VDC
Environment
Temperature
0 — 55°C (Operating)
0 — 70°C (Storage)
Humidity
up to 90% non-condensing
Power Consumption
FMUX04E
20W
Dimensions(WxDxH)
FMUX04E
195mm x 45mm x 255mm
Weight
FMUX04E
980g
Compliance
FCC, Part 15, Sub B (Class A) European
standard EN55022:
1994/A1 : 1995/A2 : 1997 Class A,
EN61000-3-2:1995, EN61000-3-3:1995
and EN50082-1:1997
MTBF
87,000 hours